SUPPORT + FAQ's

LEARN MORE ABOUT YOUR PRODUCTS

HOW CAN WE HELP?

LET US KNOW EXACTLY HOW WE CAN ASSIST YOU TODAY!
Our team of industry professionals are here to help you understand how to use your rolling accessories and pre-roll production products.

FUTUROLA'S ICONIC

CONE ROLLER

ROLL UP A TIP AND PLACE IT ON THE LINED SIDE OF THE ROLLER. ARRANGE YOUR MIX INSIDE THE ROLLER, WITH MORE MIX TO THE SIDE OPPOSITE OF THE TIP. CLOSE THE ROLLER, AND ROLL THE MAT A FEW TIMES TO EVEN OUT THE MIXTURE. PLACE ROLLING PAPER INTO ROLLER WITH THE GLUE SIDE FACING YOU. ROLL THE MAT A FEW TIMES TO WRAP THE PAPER AROUND THE MIX. WET THE GLUE ON THE ROLLING PAPER, AND CONTINUE TO ROLL THE MAT UNTIL THE ROLL IS SEALED. OPEN THE ROLLER TO MARVEL AT YOUR MASTERPIECE. 

FUTUROLA'S ARTISANAL

PRE-ROLLED CONES

FUTUROLA PRE-ROLLED CONES ARE HANDCRAFTED WITH ONLY THE FINEST, THINNEST PAPERS FROM FRANCE AND SPAIN, AND ORGANIC ARABIC GUM FROM THE ACACIA TREE. 

STANDARD, SLENDER, FATBOY + PARTY

ARTISANAL PRE-ROLLED CONES

STANDARD | CONE CAPACITIES ±0.6-1.3G — CROWN DIAMETER UP TO 15MM 

SLENDER | CONE CAPACITIES ±0.3-0.6G — CROWN DIAMETER UP TO 12MM  

FATBOY | SPECIALTY 3.0G CONE* — CROWN DIAMETER UP TO 18MM 

PARTY | SPECIALTY 2.0G CONE* — CROWN DIAMETER UP TO 18MM

FILL 50, 100, OR 300 CONES PER CYCLE

FUTUROLA KNOCKBOX SERIES

THE FUTUROLA KNOCKBOX IS THE INDUSTRY-LEADING SOLUTION FOR FILLING PRE-ROLLS AND CONES IN EXTRAORDINARY QUANTITIES, WITH AN ARTISANAL LEVEL OF PRECISION. 

OPTIMIZE YOUR FINISHED PRODUCT WITH FILLING CYCLES LASTING 60 OR 90 SECONDS USING THE DENSITY-BUTTON ON THE CONTROLLER. 

 

OPTIMIZE YOUR YEILD

FUTUROLA TRIMMER MACHINES

FUTUROLA TRIMMERS SEPARATE UNWANTED LEAVES, AT A MODERATE 16 ROTATIONS PER MINUTE, WITHOUT DISRUPTING THE DELICATE STRUCTURES OF THE PLANT. 

DIAL IN PERFECT RESULTS WITH TIMER CYCLES FROM 1-15 MINUTES. 

AVERAGE CYCLE TIME VARIES FROM 7-12 MINUTES. SINGLE-BOLT DISASSEMBLY FOR CLEANING; PREFERRED EVERY 300LB.

 

SHRED POUNDS IN SECONDS

FUTUROLA SHREDDER MACHINES

STANDARD SHREDDER MIX MUST HAVE STEMS REMOVED PRIOR TO SHREDDING.

SUPER SHREDDER MODELS WILL AUTOMATICALLY SIFT STEMS AFTER SHREDDING. 

LOAD MIX* INTO THE BARREL. CLOSE & LATCH THE LID. USE THE +/- BUTTONS TO SELECT YOUR CYCLE LENGTH. PRESS RUN. REPEAT IF NEEDED.

REMOVE PIN TO MOVE STANDARD SHREDDER INTO UNLOADING POSITION, OR SIMPLY REMOVE THE MIX BAG FROM SUPER SHREDDER MODELS.